lost the only key to my 954..decided to buy a new ignition key, and cap off ebay from china,tried wiring up the 3 wires, did not work, then i figured that there was no diode in the ignition switch, so i buy a 3.9 diode zener from a electrical store, and i got the speedo to light up and fuel pump is priming,
but bike wont start.
all i did was take the two red wires connected them to one end of the diode, and the pink to the other end, just to see if i can start it. but nothing.
is it possible to get the bike running like this?
is it possible to burn the computer if i was careless with the wires?
i got two computer but i don't know i might have killed both before i figured the right way to hook up the three wires that go in to the ignition.
They Can make a key using the number code on the ignition for like $10
I'm fucked now,Someone tolled me there was chip in the key or some shit and your fucked if u lose it..so i kinda had to hit the original ignition with a hammer to get it off,the bolts holding it were striped...then i found out that us bikes don't even have that..
All materials contained on this website are protected by United States copyright laws and may not be reproduced, distributed, transmitted, displayed, published or broadcast without the prior written permission from a representative of Stuntride Inc. You may not alter or remove any trademark, copyright, or other notice from copies of this content.
The messages posted within this site express the view of the author of the message, and do not represent the views of site owners, administrators, moderators or affiliates.